basforge

Search titles, text and the “If it doesn’t work” cases.

    RU

    Edit the MikroTik firewall and bridge in Safe Mode

    Before a change that can cut you off from the router — firewall, bridge, VLANs, addresses — turn on Safe Mode: Ctrl+X in the terminal or the button in Winbox. If the connection drops, RouterOS rolls back everything done in this mode.

    Safe Mode is the same as a second SSH session while editing sshd (Keep the old session open), only built in. While the mode is on, RouterOS remembers every change. If the session closes normally after leaving the mode, the changes stay. If it drops, the router rolls them back on its own.

    # Ctrl+X
    [netadmin@MikroTik] <SAFE> /interface bridge set bridge vlan-filtering=yes
    # connection lost → after a while the router puts back vlan-filtering=no
    # connection still there → Ctrl+X again, the changes are saved

    A router has one Safe Mode. If it’s already on in another session — a second Winbox window or a colleague’s — RouterOS 7.24 prints Safe Mode is taken by current user in another session. and asks Unroll, release or abort [u/r]?: u rolls back that session’s changes and takes the mode, r keeps them and takes it, any other key gives Action aborted. and leaves everything as is.

    Don’t start without Safe Mode on:

    • the firewall, especially the input chain and “drop all not coming from LAN”;
    • bridge ports and vlan-filtering;
    • addresses and the default route;
    • /ip service and /user.

    If it doesn’t work

    Turned on vlan-filtering, the connection dropped and didn’t come back — with Safe Mode on

    Cause
    The router doesn’t learn about the drop right away: it waits until the Winbox or SSH connection is considered dead — up to 9 minutes per the documentation, the TCP timeout. There’s no setting for it.
    Fix
    Wait a few minutes and reconnect. If that doesn’t help — Winbox by MAC from a port that stayed in the home network.

    <SAFE> vanished from the prompt though you never left the mode

    Cause
    Safe Mode has a limited history of the last 100 actions; past that, the mode turns itself off, and everything done up to that point stays.
    Fix
    Make big changes in parts, each in its own Safe Mode, or as a script from a file you’ve read through first.

    How to check

    Turn on the mode, change something harmless — a firewall rule’s comment — and close the Winbox window with the X without leaving the mode. After you reconnect, the comment is back to what it was: rollback works.