What you’ll get
How many errors a backup log has, and which:
# log_errors.py
log = """2026-10-21 10:00:01 INFO backup started
2026-10-21 10:04:12 ERROR disk /dev/sdb not found
2026-10-21 10:04:13 WARNING retry in 5 s
2026-10-21 10:04:18 ERROR disk /dev/sdb not found
2026-10-21 10:05:00 INFO backup finished"""
errors = 0
for line in log.splitlines():
if "ERROR" in line:
errors += 1
print(line)
print("Errors:", errors)
python log_errors.py
# 2026-10-21 10:04:12 ERROR disk /dev/sdb not found
# 2026-10-21 10:04:18 ERROR disk /dev/sdb not found
# Errors: 2
splitlines() cuts the text into lines, and for takes them one at a time into the name line. errors += 1 is short
for errors = errors + 1. The last print has no indent — it runs after the loop, once. Reading the log from a file
comes in the “Files and paths” chapter; the loop stays the same.
How it works: for takes one at a time
for name in collection: takes the next value out of the collection, puts it into the name and runs the block; when
the values run out, the loop ends. A collection can be anything you can walk through:
| Over what | Example | What goes into the name |
|---|---|---|
| lines of text | for line in log.splitlines(): |
one line after another |
| characters of a string | for ch in "ssh": |
"s", "s", "h" |
| numbers | for n in range(1, 101): |
1, 2, … 100 |
| a file, a list, a dictionary | the “Files and paths”, “Lists and tuples”, “Dictionaries and sets” chapters | lines of the file, items, keys |
range gives numbers in order: range(5) is 0 through 4, range(1, 10, 3) is 1, 4, 7, range(5, 0, -1) counts down
from 5 to 1. The end isn’t included.
When you need a line’s number along with the line, use enumerate: for n, line in enumerate(log.splitlines(), start=1):.
It hands out “number and value” pairs, and for unpacks each pair into two names; pairs are covered in detail in the
“Lists and tuples” chapter.
while — as long as the condition holds
while doesn’t know in advance how many steps there will be: it checks the condition before each one. An example — a
pause between retries that doubles each time, so you don’t hammer a server that’s down:
wait = 1
while wait < 60:
print(f"retry in {wait} s")
wait *= 2
retry in 1 s
retry in 2 s
retry in 4 s
retry in 8 s
retry in 16 s
retry in 32 s
wait *= 2 is the same as wait = wait * 2. Without this line wait is always 1, the condition is always true, and
the loop never ends. Ctrl+C stops such a script.
break and continue
break leaves the loop right away; continue drops the current step and goes on to the next:
for n, line in enumerate(log.splitlines(), start=1):
if "ERROR" in line:
print("first error on line", n) # first error on line 2
break
for line in log.splitlines():
if "INFO" in line:
continue
print(line[20:]) # without the date: ERROR disk /dev/sdb not found…
line[20:] is a slice from the Strings chapter: the date and time take the first 20 characters.
A sum of numbers is the same counter as for the errors: start at zero before the loop, add in the loop.
total = 0
for n in range(1, 101):
total += n
print(total) # 5050
Take it further
range with a step of 4 from 0 to 16 inclusive; in the f-string, , separates thousands.
for p in range(0, 17, 4):
print(f"2**{p} = {2 ** p:,}")
# 2**0 = 1
# 2**4 = 16
# 2**8 = 256
# 2**12 = 4,096
# 2**16 = 65,536Two counters before the loop; in the loop, if for ERROR and elif for WARNING.
errors = 0
warnings = 0
for line in log.splitlines():
if "ERROR" in line:
errors += 1
elif "WARNING" in line:
warnings += 1
print("Errors:", errors, "warnings:", warnings)
# Errors: 2 warnings: 1while with a condition on length; before the loop, an empty string so the condition has something to compare.
password = ""
while len(password) < 12:
password = input("Password, 12+ characters: ")
print("accepted")If it doesn’t work
The script never ends, and the terminal doesn’t respond
- Cause
- The
whilecondition is always true: nothing inside the loop changes what it checks. - Fix
Ctrl+Cstops the script withKeyboardInterrupt. The loop needs a line that moves toward the exit:wait *= 2,tries += 1.
range(1, 10) didn’t reach 10
- Cause
- The end isn’t included in
range, just as in a slice:range(1, 10)is 1 through 9. - Fix
- For up to and including 10, use
range(1, 11).
The total prints on every step instead of once
- Cause
- The
printis indented inside the loop. - Fix
- Move the
printleft, to the level offor: a line without the indent runs after the loop.
TypeError: 'int' object is not iterable
- Cause
for i in 5:— you can’t walk through a number; you need a collection.- Fix
- Five repetitions:
for i in range(5):.
IndentationError: expected an indented block after 'while' statement on line 2
- Cause
- The loop body isn’t indented.
- Fix
- Indent the body 4 spaces under the line with the colon.