What you end up with
ether1 the ISP: DHCP or PPPoE
ether2…5, Wi-Fi home: 192.168.88.0/24, the router is 192.168.88.1
user your own, in the full group; admin disabled
RouterOS the latest in the long-term channel, RouterBOOT at the same version
Wi-Fi your country, your network name, WPA2 + WPA3
management Winbox, WebFig and SSH — only from the home network
copy a text /export and a .backup — on your computer
The commands are for the terminal: in Winbox it’s the New Terminal button, in WebFig Terminal at the top right, or
ssh [email protected]. All of it can be done with the mouse in Winbox — the menus match the commands.
Steps
Connect and log in
The ISP’s cable goes into
ether1, the computer intoether2by cable or onto the Wi-Fi network from the sticker. In the browser openhttp://192.168.88.1, or start Winbox and pick the router in the Neighbors tab. Loginadmin, password from the sticker underneath.On the first login RouterOS offers to change the
adminpassword — do it: the sticker password is visible to anyone who turns the router over.Save the factory config and check the version
/system resource print # version: 7.20.8 (long-term) # board-name: hAP ax^2 /export file=factoryfactory.rscappears in Files: it’s the factory config as text, something to return to or compare your changes against (MikroTik config backup).Connect the ISP
If the ISP hands out addresses by itself, everything already works — the factory config has a DHCP client on
ether1:/ip dhcp-client print # Columns: INTERFACE, USE-PEER-DNS, ADD-DEFAULT-ROUTE, STATUS, ADDRESS # # INTERFACE USE-PEER-DNS ADD-DEFAULT-ROUTE STATUS ADDRESS # 0 ether1 yes yes bound 198.51.100.27/24For PPPoE, create a client and add it to the
WANlist. Without the second line the router has internet but the network doesn’t: masquerade and firewall protection only work for interfaces in that list./interface pppoe-client add name=pppoe-out1 interface=ether1 user="username from the contract" \ password="password from the contract" add-default-route=yes use-peer-dns=yes disabled=no /interface list member add list=WAN interface=pppoe-out1 /interface pppoe-client print # Flags: R - RUNNING # 0 R name="pppoe-out1" max-mtu=auto interface=ether1 user="…"If the internet arrives in a VLAN, the ISP gives the number: first
/interface vlan add name=vlan-isp vlan-id=… interface=ether1, then the PPPoE or DHCP client onvlan-isp, and that goes intoWANas well.Create your own user
/user add name=netadmin group=full password="a long password from your password manager"Log in as
netadminin a new Winbox window or withssh [email protected]— and only then disableadmin. Every bot knows the nameadmin: password guessing starts with it./user disable adminFor SSH with a key:
/user ssh-keys import public-key-file=id_ed25519.pub user=netadmin, after putting the file in Files (SSH keys).Update RouterOS
For a home router, use the
long-termchannel: fixes only, no new features./system package update set channel=long-term /system package update check-for-updates # channel: long-term # installed-version: 7.20.8 # latest-version: 7.23.8 # status: New version is available /system package update installThe router downloads the packages, reboots and comes back in 2–3 minutes. New features and
stable— when you need them (RouterOS).Update the RouterBOOT bootloader
/system routerboard print # current-firmware: 7.20.8 # upgrade-firmware: 7.23.8 /system routerboard upgrade /system rebootThe bootloader updates separately from the system, and the new one runs only after a reboot (RouterBOOT update). To have it happen automatically next time:
/system routerboard settings set auto-upgrade=yes.Set the country, Wi-Fi name and password
# your own country: press Tab after configuration.country= for the options /interface wifi set wifi1,wifi2 configuration.country=Latvia configuration.ssid=home \ security.authentication-types=wpa2-psk,wpa3-psk \ security.passphrase="a password of 12+ characters" /interface wifi print # Flags: M - MASTER; B - BOUND; R - RUNNING # # NAME MAC-ADDRESS CHANNEL SSID # 0 MBR wifi1 … 5180/ax/eeCe home # 1 MBR wifi2 … 2412/ax homeThe country sets which channels and power the router may use; with the wrong country it can pick a channel that’s forbidden where you are, or transmit too weakly. One network name for both bands — the phone picks 5 GHz near the router and 2.4 GHz behind walls on its own.
Close unneeded services
/ip service print # Flags: D - DYNAMIC; X - DISABLED # # NAME PORT # 0 ftp 21 # 1 ssh 22 # 2 D c ssh 22 # 3 telnet 23 # 4 D dhcp 67 # 5 D dhcpclient 68 # 6 www 80 # 7 X www-ssl 443 # 8 reverse-proxy 443 # 9 D btest 2000 # 10 D discover 5678 # 11 winbox 8291 # 12 api 8728 # 13 api-ssl 8729 /ip service disable telnet,ftp,api,api-ssl /ip service set www,ssh,winbox address=192.168.88.0/24 /tool bandwidth-server set enabled=noWhich services are on from the factory depends on the version; above is 7.24, where only
www-sslis off. RouterOS adds theDrows itself — DHCP,btest, neighbor discovery and the current SSH session;btestgoes away afterbandwidth-server set enabled=no.reverse-proxyis on, but without a certificate port 443 stays closed. In 7.24 the address column is calledAVAILABLE-FROM, andaddress=still works. Telnet and FTP send passwords in clear text, and the API is only for your own programs. The remaining three answer only home-network addresses, even if the firewall ever breaks.bandwidth-testis a service for measuring speed between MikroTik routers; a vulnerability was found in it in September 2026 (CVE-2026-67277), and a home doesn’t need it (Management from inside only).Set the time and save a copy
/system clock set time-zone-name=Europe/Berlin # your own zone: Tab for the options /system ntp client set enabled=yes /system ntp client servers add address=pool.ntp.org /export file=hap-2026-10-19 /system backup save name=hap-2026-10-19 password="backup password"Without NTP the router has no accurate time: the log shows the wrong clock, and certificates and schedules misbehave. Take both files to your computer (Files in Winbox, drag and drop): if the router breaks, a copy on it won’t help.
.rscis text you can read and paste into another router;.backupis only for this same router (MikroTik config backup).
If it doesn’t work
http://192.168.88.1 won’t open
- Cause
- The computer didn’t get its address from the MikroTik: it’s connected to the old router or another Wi-Fi network, or the network card has a static address.
- Fix
ipconfig(Windows) orip addr(Linux) — the address should be192.168.88.x. If not, plug a cable intoether2and set the card to obtain an address automatically. Or use Winbox by MAC: it finds the router in the Neighbors tab without IP.
PPPoE won’t come up; the log says authentication failed
- Cause
- A typo in the username or password, or the ISP binds the connection to the old router’s MAC.
- Fix
- Check the details from the contract;
/log print where topics~"pppoe"shows the ISP’s reply. For a MAC binding, call the ISP or set the old router’s MAC onether1:/interface ethernet set ether1 mac-address=….
PPPoE is up, the router pings 1.1.1.1, but the computers have no internet
- Cause
pppoe-out1isn’t in theWANlist: the default config’s masquerade only works for interfaces in that list.- Fix
/interface list member add list=WAN interface=pppoe-out1— step 3.
After install the router hasn’t answered for several minutes
- Cause
- It’s installing packages and rebooting; on NAND models that takes 2–3 minutes, sometimes more.
- Fix
- Don’t cut the power. If after 10 minutes it still doesn’t answer — Netinstall: it reinstalls RouterOS over the network from a computer, and the config is lost, so you need the copy from step 9.
After /user disable admin nobody can log in
- Cause
- The new user wasn’t created in the
fullgroup, or the password was mistyped. - Fix
- Reset to the factory config with the reset button (hold it while powering on until the LED flashes) and redo the steps. That’s why step 4 tests the new user’s login before disabling
admin.
How to check
From outside — another server, or a phone on mobile data with any online port scanner. The router’s address is from
step 3 (198.51.100.27 in the example):
nmap -Pn -p 21,22,23,80,443,2000,8291,8728,8729 198.51.100.27
# PORT STATE SERVICE
# 21/tcp filtered ftp
# 22/tcp filtered ssh
# …
# 8291/tcp filtered unknown
sudo nmap -Pn -sU -p 53 198.51.100.27
# 53/udp open|filtered domain — no reply, DNS doesn't answer from outside
Every port is filtered: the firewall drops the packets, and the router is invisible from outside. Even one open —
look at the firewall (MikroTik firewall).
From inside — check that fasttrack works and your plan’s speed reaches the computer:
/ip firewall filter print stats where action=fasttrack-connection
# 0 forward fasttrack-connection 2 113 773 041 1 950 112
If the counter grows during a speed test, traffic bypasses the firewall and the CPU keeps up.